Clear Figure Base - 40mm Round
These bases are 40mm in diameter and are simple laser cut disks of 3mm clear acrylic.
Two things to note:
Because of the way they are cut they have a slight burr at the 'corners' i.e. where surfaces meet the cut edges. This does not detract from their appearance but you can feel that it's there. Should you wish to remove it this can be easily done with fine abrasive paper, without detracting from the appearance of the base. In the image to the right, the figure on the left stands on a base with a burr while the figure on the right stands on a base that has had the burr sanded away. As you can see: there's no visible difference.
Superglue has a tendency to mist clear plastic as it dries so be sure to use the tiniest amount when attaching your figures.
This product can be found on our Figure Bases page, along with similar products that may be of interest to you.
Aeronef™ is a trademark of Wessex Models.
Citadel™ is a trademark of Games Workshop Limited.
Games Workshop™ is a trademark of Games Workshop Limited.
Hirst Arts™ is a trademark of Hirst Arts Fantasy Architecture Inc.
This site and its content are not affiliated with or endorsed by any of the above.