Clear Figure Base - 20mm Square
These bases are 20mm square and are laser cut from 2mm clear acrylic.
Two things to note:
Because of the way they are cut they have a slight burr at the 'corners' i.e. where surfaces meet the cut edges. This does not detract from their appearance but you can feel that it's there. Should you wish to remove it this can be easily done with fine abrasive paper, without detracting from the appearance of the base.
Superglue has a tendency to mist clear plastic as it dries so be sure to use the tiniest amount when attaching your figures.
This product can be found on our Figure Bases page, along with similar products that may be of interest to you.
Aeronef™ is a trademark of Wessex Models.
Citadel™ is a trademark of Games Workshop Limited.
Games Workshop™ is a trademark of Games Workshop Limited.
Hirst Arts™ is a trademark of Hirst Arts Fantasy Architecture Inc.
This site and its content are not affiliated with or endorsed by any of the above.