Steampunk Cogs Set
These cogs are cut from 1mm MDF. The largest is approximately 50mm diameter (to the outside of the teeth) while the smallest is approximately 10mm. The axle holes are approximately 2.5mm diameter.
The three cogs to the left of the image are supplied with additional tooth and axle rings (shown next to them) that can be glued on top to make them a bit more 3D.
Note that the teeth have been cut using proper geometry such that the cogs will mesh together however they are NOT intended for use in constructing working machines (the MDF won't stand up to the wear and tear).
Please also note that these cogs are something of an experimental product to see how customers react to them. If you'd be interested in other designs, please let us know what you need and we'll see what we can do. :-)
This product can be found on our Miscellaneous page, along with similar products that may be of interest to you.
Aeronef™ is a trademark of Wessex Models.
Citadel™ is a trademark of Games Workshop Limited.
Games Workshop™ is a trademark of Games Workshop Limited.
Hirst Arts™ is a trademark of Hirst Arts Fantasy Architecture Inc.
This site and its content are not affiliated with or endorsed by any of the above.